The advantage of the industrial LCD screen is that it is relatively light and beautiful, and it is also more practical. It can be operated by directly clicking, which is convenient and fast. The tactile feedback function in its touch screen system is also very powerful.

1. The film surface of the touch screen is a touch surface, that is: the front of the product; the glass surface is a non-touch surface, that is: the back of the product.

2. Most of the touch screen is made of glass, and the corners of the glass are relatively sharp. Please wear gloves/finger cots when assembling. Be careful not to cut your hands when you move.

3. Most of the touch screen is also fragile glass. Do not apply too much impact to the touch screen during assembly. If it is damaged, you need to find a manufacturer for additional customization, which is also very troublesome.

4. Avoid getting the leads directly. Pick up the LCD screen and avoid pulling the parts of the leads.

5. The part of the reinforcement plate of the lead-out line cannot be bent.

6. Any part of the lead-out line is not allowed to be folded in half.

7. When we assemble the lead wire, it must be inserted horizontally, and must not be folded and inserted at the root of the reinforcing plate.

8. Single-chip operation is required when picking and placing the product, and it must be handled with care to avoid scratching the surface of the product after the products collide with each other.

9. When cleaning the surface of the product, please use a soft cloth (deerskin) dipped in petroleum ether to wipe it, and keep it dry.

10. Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as: industrial alcohol and so on.

11. Do not stack touch screens, use trays.

12. When designing assembly and frame, please pay attention to the following items:

a. The pillars that fix the frame of the touch screen must be outside the visible area of the touch screen.

b. The border of the frame must be outside the operating area of the touch screen, and no pressure action can exist between the visible area and the operating area of the frame.

c. It is recommended that the material for fixing the touch screen is plastic material, and the front part that touches the touch screen is padded with soft material.

d. Do not use corrosive glue on the surface of the touch screen, which will easily corrode the screen.

13. After use, you must turn off the power and shut down in time.

14. It is forbidden to disassemble and assemble without permission, because it is a precision instrument. Any modification may affect its use.

Because it is used in industry, the design of the LCD screen is already special, which is better than those used at home. The industrial LCD screen is not only beautiful, but also very durable. However, durability also depends on some things that users pay attention to during use, and it must be well maintained, so that its life will be longer. Although the industrial LCD screen is durable, it is still very troublesome to repair after it breaks. After all, it is embedded into some kind of machinery.