Usually, some customers will worry about touch when they leave the mold segment code LCD, before they choose the plan solution is usually to open another touch screen, but then usually the structure above will get thicker and thicker, also will cause harm to the actual effect. In this case, the segment code LCD with built-in touch came into being. In the application, the use of built-in touch segment code LCD need to pay attention to what? What are the common problems?

Built-in touch segment code LCD in everyone's field is known as two-sided ITO processing technology, simply look, is to add a conductive layer on the surface of the LCD, in accordance with the conductive layer on the etching process route, you can complete the function of touch. At this stage, many customers have adopted this type of product. So, what are the common problems in the application of such products?

Although this screen has a built-in touch function, but compared with professional touch screen is not the same, from the actual effect of touch, no doubt not as smooth as a professional touch screen.

Secondly, because the surface is a conductive layer to complete the touch, so in the application of the situation to try to pay attention to prevent the LCD screen surface extrusion molding and scratches. We can also use the control panel to maintain, but the thickness must not be too thick, so as not to jeopardize the actual touch effect.

Finally, and most importantly, this segment LCD with touch can be applied in which natural environment, each touch such customers will carefully understand the application of the natural environment, so far, most of the customers of these products for consumer products, rather than industrial production products, because the basic principle of this touch is similar to the basic principle of capacitor touch, when the surrounding influence is too large, it is likely to cause product operation errors. Therefore, even if you want to use, but also be sure to get the physics of the touch screen power switch function. In the natural environment of industrial production, we are not advocating this kind of goods, so that customers can rest assured is considered our ultimate goal.