With the development of liquid crystal display technology, today's liquid crystal display has become a must-have product for many people, especially electronic products. The LCD screen is a relatively expensive product, and attention should be paid to protection in daily use and transportation, so how to prolong the life of the LCD screen?

1. Avoid Prolonged Use of the Screen

Whether it is a semi-finished TFT LCD panel to be tested or an all-in-one LCD display, working for long hours is not a good thing for LCDs. Please turn off the power when you are not using your LCD screen. By the way, screen wallpapers and screen savers are used less frequently or by donors. Because the screen wallpaper and screen saver have high color and strong contrast. Using them for extended periods of time can distort the color of the LCD, affecting the lifespan of the LCD monitor. Therefore, it is better to use a single color or cancel the screen saver.

2. Avoid Vibration During Transportation

The TFT LCD screen is very fragile because there is a glass part in the screen, and strong vibrations and vibrations can damage any accessories inside, including the glass. Do not apply any pressure to the LCD screen, and do not bump or squeeze it.

3. Anti-electromagnetic Interference

LCD monitors should be kept away from objects with strong magnetic fields. The strong surrounding magnetic field can generate additional voltage inside the display, which affects the stability of the LCD voltage. Exposure to a strong magnetic field for a long time will also cause color distortion, which will affect the display effect and lifespan of the liquid crystal display.

4. Moisture-proof

Take care to avoid moisture entering the wire mesh. If the indoor humidity is too high, and the screen is not protected from rain outside, condensation may occur inside the LCD screen, causing leakage and short circuit of the LCD screen, or even burning the screen.

5. Regular Cleaning

When cleaning the TFT LCD screen, please turn off the power first, unplug the power cable and signal cable, and then carefully wipe the screen from the center of the screen with a soft cloth and detergent. You can use clean water + soft lint-free cloth or pure cotton lint-free cloth, do not Spray the liquid directly on the screen to prevent moisture from entering the inside of the LCD screen.